|
USB Based Dual-channel digital oscilloscope.
ScopeDAQ allows the user to capture the data with a frequency of up to 100MHz.
Higher sampling frequency (200MHz) is available if the user is only using one channel.
Basic version of the instrument is equipped with 128K data buffer, optionally it can be enlarged up to 512KB.
|
Key features:
|
| Sampling
rates |
200MHz*,
100MHz, 50MHz, 20MHz, 10MHz, 5MHz, 2MHz, 1MHz, 500kHz, 200kHz, 100kHz,
50kHz, 20kHz, 10kHz, 5kHz, 2kHz, 1kHz, 500Hz, 200Hz
* 1 analog channel |
| Analog inputs |
2 channels
analog gains: 5V/div, 2V/div, 1V/div, 500mV/div, 200mV/div, 100mV/div,
50mV/div, 20mV/div (5 divs, probe 1:1)
maximum input voltage: 25V (probe 1:1)
ADC resolution: 8-bits
analog bandwidth: 20MHz
coupling: AC, DC
input impedance: 1MOhm, 15pF |
| Data
buffer |
Variable:
256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072,
262144*, 524288* samples
* available after memory expansion |
| Trigger (analog) |
Level triggering (rising
or falling edge) with noise reduction feature,
external trigger input. |
| Trigger
level |
Variable
threshold level for analog signals (full range) |
| Capture delay |
Depending on sampling
rate: for 200MHz max. 500ms, for 100Mhz - 1s, etc. |
| Pre-
and Post Trigger buffers |
Variable
size of Pre- and Post Trigger buffers |
| Power supply |
External, 5V/1A |
| Dimensions |
Width:
110mm, length: 130mm, height: 42mm |
| Software |
Easy to use Windows™
application, Most important functions and parameters directly
available on main screen.
Features: measurement cursors (voltage, time, frequency), reference
signals, zoom, signal prints, configuration save. |
| System
requirements |
Pentium
II or compatible, USB port, minimal screen resolution: 800 x 600
pixels (High Color). |
| Set contents |
ScopeDAQ instrument,
power supplier, USB cable, CD with software |
|
